Your carpets are beautiful however, they sometimes require a little bit of extra love and care. It doesn’t matter if it’s due to an accident or simply general wear and tear, occasionally your carpets require to be cleaned by hand. Don’t worry that it’s not as hard as it may sound! This is a step-by-step tutorial for hand-washing your carpets.

Pet urine is a issue and will require Carpet Cleaning in Cold Springs! It can create odors and spread disease. But My Steam Green Carpet Cleaning in Cold Springs can help you get your carpets clean cleaning for good! Call us now!

Step One: Prep the Area

Start by clearing everything from the room you can. This includes furniture or knick-knacks as well as rugs or carpets which aren’t being cleaned. If possible, open up any windows to let in sunlight and fresh air. After the room is clean and clean, give the carpet a thorough vacuum. Particularly pay focus on areas that are frequented by people as well as any areas that might be dried-on dirt or debris. If you have the time let the carpet air out for 30 minutes before starting to clean it.

Step Two: Mix Your Solution

In a bucket or bowl, mix together one cup of white vinegar with the equivalent of one cup of water. Mix until all the ingredients are blended.

Step Three: Spot Test

Before applying the solution on the carpet in its entirety, it’s crucial to conduct a spot test in a small area before applying the solution. This will help you make sure that the solution won’t harm or alter your carpet or alter the color of your carpet in any manner. To test the spot you need to apply an amount of solution onto a clean cloth and then blot it on the carpet. Let the solution sit for five minutes prior to moving into the next stage.

Step Four: Wash the Carpet

Once you’ve established that the solution won’t cause damage to the carpet, start washing! Using a clean cloth or sponge apply the solution to small sections of the carpet, moving from the top to the bottom. Use gentle circular motions and be careful not to scrub too hard; you don’t want to scratch the fibers of your carpet! While you’re working take care to pay attention to any heavily soiled areas. If needed, use a brush with soft bristles to get stubborn dirt from these areas. Be careful not to use a lot of pressure as you don’t want to damage carpet fibers!

Step Five: Rinse and Repeat

Once you’ve cleaned all carpets with the cleaning solution, now is the time to wash it using clean water. With a clean sponge or cloth use fresh water on small areas of the carpet and then dry. Work from top to bottom and avoid scrubbing too hard–you don’t want to damage delicate carpet fibers! Repeat this process until all traces of the cleaning solution have been eliminated from the carpet.

Does carpeting fit under the jamb on the door in Cold Springs?